| Quantity: | |
|---|---|
| Supply voltage | 380V/50Hz | Edge band thickness | 0.8-3mm |
| Milling motor | 2X3.5KW | Auxiliary heating | 2kw |
| Total power | 16.5KW | Board thickness | oblique straight edge 15-25mm/pure bevel edge 18mm/straight edge 15-35mm |
| Glue pot motor | 0.55KW | Electric lifting motor | 0.37kw |
| Glue pot capacity | 2000ml | Conveying speed | 12-16 m/min |
| Front and rear head motor | 2X2.2KW | Conveying motor | 1.5kw 32 axis |
| Heating temperature | 150 °C-200 °C | Glue pot heater | 2kw |
Control screen: The machine is equipped with a touch screen, the operation is intuitive and easy to manage, the parameters can be adjusted quickly, the plate can be continuously put in at intervals of 3 seconds, batch production can be achieved, and it has an automatic recording function to avoid material waste caused by overproduction.
Automatic feeding device: adopts side plate design to ensure stability and firmness during operation, reduce material damage caused by vibration or offset, equipped with high-performance motor, effectively improves conveying efficiency, from milling to forming, completed in one go, no manual operation required.
Pressure beam: electric lifting pressure beam, pressure beam made of a whole aluminum profile, no welding, high precision, beautiful, strict dimensional tolerance, bottom beam adopts widened and thickened design, which increases its load-bearing capacity and durability.
Milling unit: equipped with 2 sets of diamond pre-milling cutters, high milling precision, strong wear resistance, reduced replacement frequency, flat milling without burrs.
Edge band slotting: adjustable edge band slotting height and depth, slotting height with digital display, intuitive operation and easy adjustment, ensure the accuracy and stability of slotting, and meet the precise control of different customers' diversified production needs.
Glue pot: adopts EVA glue pot design, with a large capacity of 2000ml, which can meet the needs of continuous production. One-touch glue removal, Teflon coating on the inner wall of the glue pot effectively prevents glue adhesion and glue hanging, and the glue pot is easy to clean and maintain.
Cutter: Pneumatic cutter, stable cutting, reducing errors caused by vibration, etc. The cutting flatness and verticality are good, ensuring the cutting quality of the edge banding.
Multiple limiters:The card slot limiter, through the precise limiter design, prevents the edge banding from moving up and down during the processing process, ensuring smooth belt feeding.
Strip plate limiter (3 groups): Precision design, adjusted according to the width of the edge banding, effectively preventing the edge banding from running up and down during the bonding process.
Pressing: Adopting twelve independent staggered pressing, through the combination of 7 groups of straight pressing and 4 groups of inclined pressing, and all adopting floating structure design, to meet the pressing needs of different angles, making the edge banding more firmly pressed. A group of inclined pressing is specially added, which is specially used for pure inclined mode edge banding operations.
Hot air gun heating: The pressing unit is equipped with a hot air gun heating aid to soften the edge banding strip while also avoiding the problem of hot melt adhesive cooling quickly and not sticking to the board.
End cutting: quickly cut off the excess edge banding strips at both ends, and the two saw blades cooperate front and back to achieve high precision and high efficiency.
Trimming: quickly cut off the excess edge banding strips at both ends, and the two saw blades cooperate front and back to achieve high precision and high efficiency.
Scraping: using upper flat scraper and lower arc scraper, the upper flat scraper scrapes off the upper edge banding strip, leaving a horizontal arc, and the lower arc scraper scrapes off the excess glue line to produce a natural round arc.
Up and down blowing: the up and down blowing dust removal design blows away excess debris to prevent dust and debris from affecting the trimming effect.
Polishing: before polishing, add up and down blowing to blow away excess debris, which can better remove the residual glue line on the board and make the edge banding strip round, smooth and clean.
Widening strip: after pulling apart, increase the compatibility of the board and facilitate the operation of large boards.
