Edge Banding Strip Slitting Machine

What should you do if the edge banding strip you are currently using is too wide but needs to be used to narrow the board?

This article will introduce you to how an edge strip slitting machine can bring you convenience in this matter.

This is a single-knife edge banding slitting machine that can effectively solve the problem of sheet width，it can be adjusted to effectively solve the problem of thin plate width. The pure copper motor has high power, reliable quality, and stable speed. The upper and lower alloy cutting tools make cutting easier and can be operated continuously for a long time. The inlet is equipped with bearing guidance, making the feeding smoother. The outlet is equipped with a limited pressure plate, making the machine stable in use.

Today we focus on introducing our new product: the double-knife meter-counting edge banding slitting machine.

The main difference between it and the single-knife slitting machine is that it can be cut into three edge strips at a time.

In addition, like the single-knife slitting machine, it can be used by plugging in the power supply. The speed is adjustable and the cutting width is adjusted by the hand-wheel. It is easy to carry and can be used at any time.

The following introduces its parameter information:

1.Power supply voltage: 220V150HZ/single phase

2.Power: 180W

3.Cutting speed：0-20m/min, adjustable speed

4.（1）Using double knife：

Edge banding width range：43-230mm

Knife 1 adjustment range：5-115mm

Knife 2 adjustment range：30-190mm

（2）Not using double knife：

Edge banding width：25-150mm

Knife 1 adjustment ranges：5-115mm

5.Edge banding thickness: 0.3-2mm

6.Edge banding width: 25-80mm

7.Body size: 410 * 550 * 545mm

8.Overall size: 1800*550*695mm

9.Weight: 48kg

Assembly method:

1.Install the tape feed tray.

2. Extend the V-belt from the mounting hole on the left side of the main unit.

3. Install the tape distribution disk.

How to use：

① Adjust the speed of the speed regulator to 0; 

② Plug in the power and turn on the switch on the speed regulator; 

③ Place the edge banding strip on the tape feed reel shaft; 

④ Place one end of the edge banding strip into the feed end of the main machine to the cutter at , adjust the movable baffle plate to compress the edge sealing strips, lock the hand-wheels at both ends; 

⑤ Adjust the speed to start cutting and stop cutting; 

⑥ Place the cut edge strips into the seams of the inner and outer combined wooden baffles, and compress the wooden baffles; 

⑦ Adjust the motor speed , waiting for the cutting to complete.

Its assembly and disassembly are also very convenient and easy to operate. If you are interested, please send us an inquiry message on our official website. We can send more videos and text materials to explain how to use it in detail.

We promise that the machine has a one-year warranty. After the customer receives the goods, a dedicated after-sales engineer will coordinate to ensure that the customer has peace of mind. Our company is a trustworthy partner of the customer!