Views: 0 Author: Site Editor Publish Time: 2024-08-28 Origin: Site
F350-Fully automatic four-sided oblique straight edge banding machine
Directly mill the straight edge board into a 45 degree oblique angle, forming it in one go from milling to edge sealing. The intelligent operation is smooth, dedicated to the machine, with fast production speed and stable quality.
Main configuration
control system
Side strip slotting
Diamond milling cutter
PUR+EVA gluing pot type gluing system
Pressing and scraping adhesive
Front and rear end alignment
Upper and lower trimming
Scraping edge
Double polishing
Hard tooth surface conveyor reducer motor
Workflow:
1. Plate pre-milling: bevel edge milling
2. Slotting of edge banding
3. Apply glue to the edge banding strip
4. 8 independent pressing surfaces, 4 straight surfaces and 4 inclined surfaces
5. Fine trimming, trimming up and down
6. Flat scraping on the top; arc scraping on the bottom (radian)
7. Flexible scraping to remove excess glue lines
8. Upper and lower polishing, forming in one step
Product selling points:
1.Milling motor, pneumatic lift, convenient for changing tools.
2.The diameter of the saw blade is 200mm, and the saw blade + milling cutter design.
3.The upper glue pot , PUR/EVA glue can be used, one-click glue discharge.
4.Auxiliary heating device, the edge banding strip is more firmly bonded.
5.The gas storage tank has a capacity of 2L and the pneumatic pressure is more stable.
