Views: 0 Author: Site Editor Publish Time: 2024-10-16 Origin: Site
If you are familiar with our soft forming edge banding machine, it should not be difficult to find that the appearance of this machine is very similar to the JC-500 we launched previously. In fact, JC-510 is an upgraded version of JC-500. Where exactly has it been upgraded? Let me introduce this machine to you.
Machine parameters:
Supply voltage：380V/three-phase five-wire/50HZ
Total power：69.3kw
Total milling power：35.3kw
Air pressure：0.6-0.8Mpa
Type of hot melt adhesive：EVA
Glue pot capacity：2600ml
Glue pot temperature：110°C-210°C
Tank volume：5L+5L
External vacuum：Vacuum port 150mm*3
Edge banding strip width：35-70mm
Edge banding thickness：Soft forming 0.52-0.8mm ；Oblique straight：0.52-2mm
Edge banding strip material：PVC (matte surface is recommended, not glossy surface)
Board thickness：18mm/22mm25mm
Board size：≥380*150mm(380 is the size of the edge banding direction)
Board shapes：There are 21 types, including J type, C type, front J, middle J, rear J, diamond, water droplet, diamond, and oblique straight edge
Feeding speed：9m/min
Dimensions：962*131*206（L*W*H cm）
Weighte：4550kg
Customizatior：PUR double glue pot for edge banding
Supportion：Software Updates
Let’s learn about some of the commonalities and differences between JC-510 and JC-500 so that you can choose them according to your needs.
Commonalities：
@One-click switch between 3 types of board thickness（18/22/25mm）.
@Precise mold milling, more accurate.
@Constant temperature pressing technology.
@High-power milling assembly，edge banding effect without graininess.
Differences：
@JC-510 apply glue to the board for stronger bonding and better effect；JC-500 only applies glue on the edge banding strip.
@JC-510 adds an oblique and straight edge sealing function on the basis of 20 shapes.One-click switch to oblique and straight edge.
Which similar machines are you interested in? You can leave us a message on the website for consultation.
