Views: 0 Author: Site Editor Publish Time: 2024-12-18 Origin: Site
How to distinguish the quality of an edge banding machine?
With the rise of whole house customization, the demand for high-quality equipment in whole house customization factories is also constantly increasing. Edge banding machine is an important component of furniture production line. The quality of furniture and the edge sealing effect are important indicators for measuring.
A high-quality edge banding machine should have high stability, high output, and high quality in order to efficiently produce high-quality furniture.
1. Pre milling: Any ripple marks, burrs, or non perpendicular phenomena caused by cutting or sawing the board, which need to be further modified to achieve a better edge sealing effect. Make the bonding between the edge banding and the board tighter, with better overall integrity and aesthetics.
2. Adhesive coating: Apply adhesive evenly on both sides of the board and edge banding to ensure a stronger bonding force.
3. Pressing: Press the edge banding tightly onto the edge of the board to ensure a tight fit between the edge banding and the surface of the board, thereby achieving a beautiful and protective effect on the edges of the board. Avoid situations where the edge banding strips detach or expand, leading to a decrease in edge quality and affecting the overall effect
4. Head alignment: Through precise linear guide motion, using automatic tracking of the model and high-frequency high-speed motor for fast cutting structure, the cutting surface is ensured to be flat and smooth.
5. Rough trimming: Generally, the width of the edge banding should be about 5mm wider than the board. For cutting tools, if the cutting amount is too large, it will have a significant impact on the tool's lifespan and cutting quality. Therefore, adding rough trimming units before finishing can effectively improve the quality of trimming and reduce the loss of finishing knives.
6. Refinement: Refinement is the further processing of the edge sealed board on the basis of rough trimming to obtain the ideal trimming curvature.
7. Imitation tracking: Apply to the intersection of the two sides of the angle to create a boundary line that matches the refined curvature.
8. Scratching: After finishing, line shaped knife marks often appear at the circular arc of the edge banding. The function of a scraper is to eliminate these knife marks, making the trimming area smoother and more aesthetically pleasing.
9. Polishing: After being cut by a cutting tool, the surface of the board will lose its luster. Therefore, the function of the polishing unit is to restore the gloss of the surface of the edge banding strip at the trimming point.
The processing of edge sealing glue line is a small process, but it is difficult to handle. Improper processing of the glue line left during edge sealing can result in rework. Over time, it will cause significant human and financial losses
C. The glue pot does not leak glue and is easy to clean
The problem of glue leakage has long plagued furniture production, often resulting in difficulties in cleaning and aging of the sol.
1. Leakage of glue: Due to transmission reasons, the sealing ring of the glue pot may be damaged, causing glue leakage and affecting the normal operation of the machine. There is no problem of glue leakage in the glue pot.
2. Sol aging: There is residual glue in the glue pot, and multiple heating aging affects the bonding quality The sol in the glue pot seeps out from top to bottom without precipitation or residue.
3. Easy to clean: The upper glue pot is more convenient than the lower glue pot, and can even be cleaned without stopping the machine, without affecting production.
4. Less faults: It is convenient to add oil to the transmission gear, reducing faults and bringing a lot of convenience to users when using the machine.
In summary, the quality of an edge banding machine is highly likely to depend on whether the machine has a fully functional configuration, whether the treatment of the glue line is appropriate and aesthetically pleasing, and whether the gluing method is simple and without any future problems.
