Views: 0 Author: Site Editor Publish Time: 2024-07-31 Origin: Site
Conveying speed: 9 m/min;
The conveying assembly has an encoder to measure meters, and the movement is precise.
Refuel regularly during the plate conveying process to ensure smooth operation of the chain block and increase durability.
Motor power: 4kW
The pressure beam automatically rises and falls, and there is a quick adjustment function on the screen, which can quickly adjust the height of the pressure beam with one click
20 shapes are standard (full-through J-shape; C-shape; half-through J-shape front, middle, and back; diamond large size left/right, small size left/right; rear half-through right circle, front half-through left circle, middle circle; water drop large size left/right, small size left/right; diamond large size, small size; arc large size, small size)
The milling structure is mature and stable, and with the "precision template", the precision milling error is ≤0.2mm (not required for straight line, full-through J, and C shapes); with a lubrication system to ensure smooth operation of the slide rail and increase durability.
4 diamond milling cutters, No. 1 and No. 2 straight edge pre-milling, using a jump cutter structure, motor power: 2.2kW*2
No. 3 and No. 4 milling shapes, using a jump cutter structure, No. 3 spindle motor power: 12kW, No. 4 spindle motor power: 7.5kW
Control milling front and rear position servo, motor power: 0.4kW*2
Slab thickness 18, 22, 25 one-key switch, milling automatic lifting, motor power: 0.75kW
The brush assembly cooperates with the dust collection assembly to collect the debris after milling, sweep and blow dust, and perform preliminary cleaning of the plate.
Milling detection device to check whether the shape matches.
Gluing pot-type glue coating system, fast gluing, one-key glue removal and cleaning are convenient.
Three limit positions (strip board, U-shaped groove, fitting wheel); ensure the stability of the strip.
The "centrifugal fan" cools the edge band to ensure smooth feeding (because the edge band will soften when it is in a high temperature state for a long time).
The pressure strip board is pneumatically controlled. There is a certain gap between it and the glue roller when it is not moving the board. It automatically fits and automatically removes glue when it is moving the board to prevent the back of the edge band from sticking.
The hot air system reheats the edge band and fits it firmly with the board after softening.
Two sets of vertical pressing
Lower straight pressing + 2 sets of baking lamps
14 sets of forming pressing, step by step (from bottom to top), the air pressure can be adjusted separately;
Constant temperature heating fan, the blowing temperature can be adjusted at will during work to ensure constant temperature of pressing; 2 sets of switching hot air (blowing upward when not moving the board, blowing the edge band when moving the board); 1 set of baking lamp; soften the edge band to increase the degree of pasting formation.
The thickness of the plate is switched between 18, 22, and 25 with one button. The pressing servo controls the automatic lifting and lowering. The motor power is 0.4kW. The rear end of the pressing is equipped with a centrifugal fan to cool the laminated edge banding. 1 set of auxiliary pressing.
The upper and lower edges are first trimmed, and the rotary trimming is used to cut off most of the edge banding.
Motor power: 1.5kW*2 pcs.
Front and rear trimming, pressure can be adjusted separately
Quickly cut off the front and rear edge banding, and the two saw blades cooperate with each other to achieve high precision and high efficiency.
Multi-tooth silent saw blade, low noise, no edge chipping
Motor power: 0.37kW*2
The upper and lower sides of the edge banding protruding from the upper and lower planes of the wooden board are trimmed into an R angle shape, so that the upper and lower edges of the edge banding are flush and smooth with the upper and lower surfaces of the wooden board.
Adjustable front and back, up and down, left and right
Motor power: 0.8kW*2
Remove excess glue residue left by trimming knife
PLC controls the cylinder movement, scrapes the edges up and down, and is equipped with a cleaning function
Polishing assembly:
Remove excess glue marks to make the edge banding smoother and cleaner
Polishing wheels rotate inward (in the opposite direction of the board)
Motor power: 0.37kW*2
This machine is mainly used for edge sealing of handle-free cabinet doors. It is very labor-intensive and time-consuming. If you are interested, please feel free to contact us.
