Views: 0 Author: Site Editor Publish Time: 2024-11-06 Origin: Site
If your budget is not enough but you need to band small boards, I am honored to recommend these small curved edge banding machines to you.
1. Stacked arm design and rotating structure are more flexible and efficient than table top curve banding, especially when banding large curved edges, its advantages are better reflected
2. Glue application: Grid-shaped glue application roller, even glue application, firm adhesion, large-capacity glue pot
3. Fitting wheel: Add 0.5mm according to the width of the edge banding strip, and adjust left and right to prevent the edge banding strip from deflecting up and down.
4. Positioning of the small white shaft: Keep the suction cup parallel to the small white shaft. Remove the small white shaft and the suction cup can be directly fixed, making it easy to band the small plates.
5. Stepless speed adjustment: Used to adjust the button to set it arbitrarily within the maximum value, accurate and shockproof, protect the power supply, and prevent misoperation
6. Control panel: using Delixi electrical components, digital display temperature controller, timer belt break, electronic speed regulator
7. Dual cylinder control: control knife and tape feeding, high-quality knife, fast cutting without burrs
8. Double pedals: The left pedal controls the suction force of the suction cup, and the right pedal controls the edge banding, tape feeding and breaking.
9. Height-limiting column: The height is adjustable to prevent the edge banding strip from moving up and down.
1. Increase the height of the glue coating assembly, which can pass the 7cm edge banding strip.
2. The glue pot has a large capacity of 2800ml to avoid adding glue multiple times. The lengthened knob makes it easy and intuitive to adjust the glue amount.
3. Brand new cutter assembly, ultra-fast response, ensuring vertical cutting accuracy
Double-column balance, stable cutter, tight structure, good cutting flatness effect
The cutting tape width can reach 70mm, and the cutting tape thickness can be 3mm.
4. The new anti-reverse walking plate prevents the edge strip from regressing, making the tape run smoothly and smoothly without deviation.
5. Bearing-type pressure plate and large knob make it easy to adjust the gap between the edge banding strip and the glue application roller to ensure uniform glue application.
6. Double cylinders automatically feed the tape. When curved edge is banded, the tape is fed and cut by a curve timer or foot pedal. When banded in a straight line, the tape is controlled by a travel switch.
7. Auxiliary pressing wheels, 2 sets of red auxiliary pressing wheels are standard, the straight edge sealing does not deviate and can be pressed twice
8. Countertop style, with work surface, suitable for edge sealing of small panels
9.The runner is equipped with a widened runner, the table width is 36cm, and it extends outward by 0-48cm when sealing the large board.
10. Intelligent temperature control, automatically stops heating when it reaches the set temperature, and automatically heats when it is lower than the set temperature.
11. Stepless speed regulation, the speed can be adjusted through the motor speed regulator, and can be set at will within the maximum value of the button.
