Views: 0 Author: Site Editor Publish Time: 2024-12-05 Origin: Site
We have recently launched a new multifunctional oblique straight edge banding machine - ZY481X. This machine can process straight edges, oblique straight edges（45°） and pure bevel edges. The pressure beam of this machine is made of a whole aluminum profile. The transmission plate has a side vertical plate structure, which is stable and firm when conveying sheets. The bottom beam is made of a whole widened and thickened aluminum profile. The overall body is stable and not easy to deform.
ZY481X can process plates with a thickness of 15-35mm when making oblique straight edge shapes, 18-25mm thick plates when making pure oblique shapes, and 15-45mm thick plates when making straight edge shapes. Feeding speed The speed is 10-16 meters/minute. The pressure beam is electrically lifted and lowered. When processing plates of different thicknesses, the thickness can be set on the touch screen without manually adjusting the height of the pressure beam.
The steps for processing plates with ZY481X are as follows:
1. Spray the release agent and pre-mill the plate. There are 2 diamond milling cutters for straight edge and bevel edge milling.
2. When making oblique straight edge shapes, the edge strips will be grooved so that they are not easily broken when bent.
3. Apply glue to the edge banding strip. A large-capacity 2L glue pot is installed on top. EVA glue can be used. It is not easy to glue and heats evenly.
4. There are 13 pressing wheels for pressing. Different styles use different pressing wheels, so the pressing is tight and firm.
5. It can end cutting ,trimmed up and down, scraped up and down, and has a chamfering function. It can process all four sides in one go without manual chamfering.
6. Clean and polish the board, and use the upper and lower blowing functions to remove residual glue lines and debris.
